DRAKE ESR-D103 Bedienerhandbuch PDF herunterladen (Seite 24)

Connecting to a Digital TV Receiver

By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in

their digital form.

TV Rear Panel

DTV Decoder

HDMI to DVI CaMe

/_f_er the collllectiolls have beer_ made.

tightell the screw to secure the cables

1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder

the DIGITAL-IN on the back of your television.

2) Connect a red cable from the DTV decoder RIGHTAUDIO OUT, to the RIGHTAUDIO

DIGITAL-IN on the back of your television.

3) Connect a white cable from the DTV decoder LEFT AUDIO OUT, to the LEFTAUDIO

DIGITAL-IN on the back of your television.

• The digital-in terminal is not compatible with the picture signal of a personal computer.

• Use a HDMI to DVI cable (commercially available) in order to digitally connect the television

with a DTV decoder.

Notes:

• If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance

may be slightly shifted. Access the "DIGITAL-IN" in the initial setup menu to adjust it. (Refer

to page 58.)

• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to

ANALOG. See "DIGITAL-IN AUDIO", page 58.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 99 100

Keine Kommentare

DRAKE ESR-D103 Bedienerhandbuch Seite 24