DRAKE Datacom DT-103 Bedienerhandbuch PDF herunterladen (Seite 11)

Punch the MENU key to return to the Select Satellite

interface, punch the red key and

Ʒͩ

key to select one

or more the satellites and punch the blue key to enter the

Satellite interface ( right side) to scan the chosen satellite

or satellites

Move the cursor onto the Satellite tape, punch the +/- key

to select the selecting satellite (note: only two or more the

satellites in Select Satellite interface have been selected,

this item has the selectivity) name which above-mentioned

Move the cursor onto the LNB type tape, therein, eight

types, punch the +/- key to select the suitable one or,

punch the OK key to enter the LNB setting interface, the

image as:

Light the LNB index (1.8) to choose one type name (for

example, Type 1 is as indication)

Light the LNB Freq. Low and LNB Freq. High menu tape,

punch the +/- key to install the parameter by referring to

the frequency value of tuner on the antenna or the

digit-keys to input the digits directly, finish installing, force

down the OK key to save the installation

Light the DiSEqC tape to select the port through pressing

the +/- key; the DiSEqC parameter of the port must be

consistent with the actual input terminal of the present

satellite antenna

Attention:

LNB Power: Single machine situation: keep the status on

the “on”

Loop situation: keep the status of the

machine which connecting the satellite signal

on the “on” and others on the “off”

Punch the MENU key to return the interface to the Satellite

one as above, light the TP Freq., punch the +/- key to

choose the suitable parameter of TP Freq., TP Polar, TP

SR or, punch the digit-keys to input the correct value

which what we according to are either Quality or Level

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 22 23

Keine Kommentare

DRAKE Datacom DT-103 Bedienerhandbuch Seite 11